重型锤式破碎机

  我公司生产的重型锤式破碎机具有运行成本低，配套功率小，生产成本低，喂料粒度大，破碎比大，产品粒度小等优点，是矿山界广泛使用的破碎设备。

重型锤式破碎机的用途：PFQ系列重型反击锤式破碎机可广泛应用于各种建设骨料、石灰石、石膏、页岩、等抗压强度不超过200Mpa低磨蚀性物料的破碎，具有破碎比大、不堵料、结构简单、产量高、投资少、粒形好、不宜过粉碎等优点。在中硬以下物料的处理上，重型锤式破碎机可代替传统破碎机颚破与反击破二段破碎，用户即可节省大量的设备投资，又可生产出粒形优良的产品。

Use：Heavy counter-diving hammer type breaker The PFQ series heavy counter-driving hammer type breaker may widely apply in each kind of building aggregate,the limesstone,the gypsum ,and so on shale, whose compressive strengrth does not surpass 200Mpa low abradability material stave,has the reduction ratio to be big does not stop up the meterial,simple stucture ,high output ,invest few the grain is good ,merit ,and so on not easy smashing .In hard below materail processing ,the aircraft may replace the traditional breaker jaw to break with instead defeats two section of stave ,the user then saves the massive equipment to invest ,also may produce grain shape fine product.

重型锤式破碎机的技术参数：